Watch a video about how to install your custom wall mural
Note, if you’re viewing this page from your iPhone, Blackberry, or Android you can watch our videos by clicking on this link to view the mobile youtube videos.
Watch The How-To Video On The Go
If you need to take this video to where you’re going to be installing your mural, it’s never been easier. If you have a smart phone you can scan this QR code and take the video with you. We’ve made all of our installation videos mobile ready so that you can have the maximum amount of convenience when you purchase a product from SignGrafx!
Installation of a Custom Wall Mural by SignGrafx
Step 1: Lay out your custom wall mural for inspection
You don’t have to lay out your entire custom wall mural at once, although you should do so if possible. Keep in mind that the first panel you install will be from the center of your custom wall mural.Notice that there is a 1” overlap between the panels of your custom wall mural
Step 2: Protect the floor beneath the installation site
Lay a protective mat, such as painter’s plastic, on the floor below the wall you’ll be installing your custom wall mural on.Remove any socket or vent covers on the wall.
Step 3: Chalk a center line to insure level installation
You can find the handy chalk line you see in this video at most hardware stores.
Step 4: Prepare wallpaper paste: 3 parts paste to 1 part water
Pour the wallpaper paste into a mixing tray.Add water and mix.
Step 5: Align the first panel to the chalk line and install
Roll your wallpaper paste onto the wall where your first panel will go.Don’t apply more than one panel’s worth of paste to the wall at one time, it will dry.Align the panel with your chalk line.Once you’re satisfied with the alignment, use a squeegee to press the panel down.If you think you need more paste at any point, don’t hesitate to use it.
Step 6: Align the second panel with the panel you just installed
Again, roll on your paste, line up the panel, and squeegee it down.Repeat with all of the remaining panels of your custom wall mural.
Step 7: Trim off the excess from the top and bottom of your custom wall mural
Use your squeegee to press the custom wall mural into the corners, and as a straight edge to cut against.
Step 8: Execute the “double cut”
Because of the 1” overlap mentioned earlier, you can cut through both overlapping panels for a seamless transition between the two.Repeat this step for all of the overlapping panels of your custom wall mural.Use an edge roller to press down the seams between panels.Now you can sit back and enjoy the whole new atmosphere of your room, thanks to your new SignGrafx custom wall mural!
Get your own Custom Wall Mural with SignGrafx
If you have a custom wall mural project that you need to get done, you need to call SignGrafx today and we can help you get started off on the right foot. Talk to one of our sales representatives at 1-800-392-9860, send us an e-mail at email@example.com, or fill out a contact form and we’ll get started right away on your custom wall mural and it will be in your hands in no time!