Vinyl Lettering – Exterior Glass

Watch a video about how to install vinyl lettering on the outside of your building’s glass

Note, if you’re viewing this page from your IPhone, Blackberry, or Android you can watch our videos by clicking on this link to view the mobile youtube videos.

Watch The How-To Video On The Go

If you would prefer to have this video next to you while you install, now you can. By scanning the QR code at right with your smartphone, you can take this video along with you. This will allow you to have this handy “how-to” installation guide to follow along with wherever your installation has to take place.


Instructional How-To Video For Installing Vinyl Lettering Onto Glass

Step 1:

Clean the surface and align your custom vinyl lettering

Make sure your custom vinyl lettering fits in the space available on your window.

Step 2:

Tape your custom vinyl lettering for registration

Hold up your custom vinyl lettering against the glass where you want to apply it.

Make sure your custom vinyl lettering is straight, use a level if you need to.

Tape at the edge with masking tape.

Step 3:

Cut the registration tape.

Cut the masking tape along the edge of your graphic, leaving half on the glass and half on your graphic.

Step 4:

Peel a portion of the backer off

Peel back the top of the back and crease it so it lays flat.

Make sure not to let your custom vinyl lettering fold over onto itself, it will be very difficult to peel apart.

Step 5:

Align your custom vinyl lettering with the registration tape

Hold your custom vinyl lettering up to the glass, being careful not to let it stick just yet.

Align the tape on your custom vinyl lettering with the tape on the glass.

Step 6:

Squeegee your custom vinyl lettering onto the glass

Once your registration tape is aligned, you can begin to squeegee your custom vinyl lettering onto the glass.

Start from the top middle and squeegee outward to the edges.

Work your way down, always starting in the middle and overlapping strokes.

Step 7:

Continue removing the backing paper and squeegeeing.

Pull down a little bit more of the backer and squeegee the revealed custom vinyl lettering.

Continue to do this, in stages, until you get to the bottom.

Step 8:

Peel off the transfer tape.

Peel off the transfer tape to reveal your fancy new custom vinyl lettering from SignGrafx!

Get Your Own Vinyl Lettering From SignGrafx

If you’re ready to purchase your own vinyl lettering, there’s no better place to do it than here.  We’ve been producing vinyl lettering for over a decade and  have the expertise to handle any type of vinyl lettering project that you have. There’s no need to risk your company’s visual appeal by using inferior services and you can rest assured that SignGrafx  will produce exactly what you want and have it in your hands in a very short amount of time. When you’re ready to make that next step, give us a call at 1-800-392-9860, send us an e-mail at sales@signgrafx.com, or fill out the contact form and one of our account managers will be sure to get back to you very quickly.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.