Show off your style with a vinyl graphic on your vehicle. Watch this video to learn exactly how it’s done.
Note, if you’re viewing this page from your iPhone, Blackberry, or Android you can watch our videos by clicking on this link to view the mobile youtube videos.
Installation of a Vinyl Graphic onto your Vehicle
Step 1: Clean the application area
Cleaning the application area is always the first step in a successful graphic installation.
Step 2: Align your custom vehicle graphic
Hold your custom vehicle graphic up to your vehicle. Make sure it fits the space in which you want to apply it.
Step 3: Tape your custom vehicle graphic in place
Use masking tape to tape your custom vehicle graphic at the edges. This tape will be your registration marks.
Step 4: Cut the registration tape
Cut the masking tape at the edge of your custom vehicle graphic, leaving half of the tape on your custom vehicle graphic and half on your vehicle.
Be careful not to cut through your vehicle’s clear coat.
Step 5: Remove backer and align registration tape
Once you’ve aligned your graphic with the registration tape you can be assured that your graphic will be exactly where you want it to be
Step 6: Squeegee graphic into place
Carefully squeegee the graphic and place being careful to eliminate any air bubbles that you find. If there are any protrusions beneath the transfer tape, cut around them so your custom vehicle graphic lays flat. Squeegee from the middle to the edges, using overlapping strokes.
Step 7: Remove transfer tape and clean surface.
Peel back the transfer tape to reveal your new custom vehicle graphic from SignGrafx!
Vinyl Graphics Have Never Been More Convenient!
If you’ve been meaning to learn how to create and install your own vinyl graphics it’s now easier than ever. Just give us a call at 1-800-392-9860, send us an e-mail at email@example.com, or fill out a contact form and will make your next vinyl graphic experience a completely headache free affair.